Simple Geometric Coffee Table

This coffee table makeover has been a LONG time coming. The little black table had been left in my apartment when I moved into it 3 years ago. Its beat up and ugly, but Id was grateful to find it there as I was in need of one at the time. Aside from its sad state, anyone who knows me could tell you that I always prefer colors and patterns to solids. Matching be damned, the more the better.Materials:-old table-primer-paintsAlas, I found my inspiration a few week ago when I went to see my talented friend, Jeanne Jolly perform. It was a great show and I finally decided what to do for the coffee table by way of my obsession with Jeannes belt. ((*(Sweet Jeanne, belt and all!)*))**Currently, Jeanne is selling downloads of her singing "Hallelujah" with 100% of the proceeds going to the Ovarian Cancer Research Fund. Please take a moment to support this. Its cheap, you get something beautiful out of it and its for an excellent cause!Click here to get it.Prepping the TableStep 1: Plan your design! The color, the number of lines, widths, etc. Even if its crude, this will save you lots of time (and probably from some errors) later.Step 2: Now that you have your design planned, youll need to measure and mark the mid point on each of the tables four sides. (The horizontal split through the middle of table did some of the work for me.)Step 3: Use a pencil and ruler to make a straight line connecting the 2 horizontal marks. Then connect the 2 vertical marks. This serves to divide the table into quadrants.Step 4: Now connect the the horizontal points to the vertical points using painters tape. When youre done itll look like a diamond.Step 5: Pick a quadrant of the table to begin marking where you tape next. Then lay tape cleanly over the line.Steps 6: Continue making marks and taping until that portion of the table resembles your design. Any tape that intersects the horizontal or vertical pencil line (from step 3) cut the tape so it meets the line but does not cross it.Step 7: Repeat step 6 in the tables other three quadrants until the table looks something like this. Take this chance to rub your finger securely over all of your tape to prevent paint from seeping beneath it later.PaintingStep 1: Get your painting area ready by placing recycled paper or a drop cloth beneath the table and set out all of your paints and primer. *(If you choose a design with a ton of color like mine, you may want to go with the sample jars to make it more affordable.)Step 2: Prime the exposed areas in a clean even layer. When youre finished priming the table will look like this:Step 2: Begin painting one portion at a time. Keep going until all of the surfaces are covered.Step 3: Allow the paint time to dry, then add a second coat.Step 4: Give plenty of time for the paint to dry, then gently remove all of the tape.Step 5: Repair any spots where paint seeped beneath the tape with matching paint or permanent marker. My edges on the side of the table got a little crunchy looking. Having a black base made it easiest for me to make corrections with a sharpie. It wont look entirely perfect, but itll be good enough to go mostly unnoticed:)*As an optional last step you may want to seal the table top in a laminate top coat.Jeanne, thank you SO much for the lovely evening and inspiration! Im loving it!TOOLS-measuring tape-pencil-painters tape-paint roller/paint brushes