The Via U! Photography blog has just posted an excellent jewelry photography tutorial that can help you (and me!) achieve outstanding photography results by taking advantage of natural light and a fe...
I’ve previously posted a tutorial showing a fun way to use up the little bits of especially luscious yarn you may have left over from your fiber projects by incorporating them into fiber jewelr...
Here’s another version of the droplet pendant showing the use of a larger briolette, a lower rise for the side wires, and 1 1/2 wraps for the coils at top.
To make this pendant you’ll need: 1 10mm round bead (hole must be large enough to accommodate two pieces of the thicker wire) 1 briolette bead approximately 8mm tall x 6mm wide 14 inches 18 or ...
These whimsical links are wonderful for spacing out beads on a hand made jewelry chain. To make the larger size shown above, you will need: About 4 inches dead soft 18-gauge or 20-gauge wire (I pref...
For these playful earrings, you’ll need: Two matching wiggle links (learn how to make them here) Two ear wires (buy them or make your own) Two small briolette beads. Two five-inch lengths of 24...
You are no longer following . Undo?
English
Suomi
Svenska