Anaya Sinha

How to Connect Canon MG3600 Printer to WiFi?

The Canon MG3600 is a wireless multifunction device, the Office Inkjet is a reliable partner in scanning, printing, copying and faxing. Go mobile! With this relatively modest device, you can print, scan and fax. Print and scan from anywhere in the home with amazing wireless capabilities. If you already have this reliable printer, let's start with the canon mg3600 wireless setup. Unpack the printer box before proceeding with the installation. Remove all accessories and keep the printer on the surface. Connect the cable to a nearby wall outlet. Using this method, you can easily get the Canon MG3600 printer configuration without having to enter the same password. Go to the article below to learn how to install a canon.

WPS connection method for Canon Ij configuration

You can still use the WPS method if your access point currently has a WPS button. You can easily get your own Canon printer configuration by following this procedure by following the simple instructions below:-

First, turn on the printer and make sure that the WPS button on the router is currently available to initiate the configuration of the Canon MG 3600.

Continue by pressing and holding the Wi-Fi button until the ON lamp flashes.

Go to the access point now and press the WPS button within two minutes Both Wifi and bulbs will flash when connecting to the access point in Canon Ij configuration.

When connected to the wireless community, the electric and Wi-Fi lamps will stop flashing but will remain lit.

Finally, make sure the Wi-Fi and power bulbs are evenly lit.

After completing the Canon printer setup. If your device has not been connected, go to another method.

Normal link method for the Canon MG3600 configuration:-

If the access point does not support WPS, follow the procedure below to configure the Canon MG3600 printer.

On the screen, click "Start configuration"

If there is a need to update the driver, it will be downloaded automatically. You must wait a few minutes for the download to finish before you can configure the Canon printer.

Now continue choosing your region and country. Then click "Next".

Accept the terms of the license agreement and click "Yes".

Allow the wizard installation process by clicking "Next".

Now select "Wireless LAN Link" for Canon Ij Setup and then tap "Next".

Make sure the printer is on and click "Next".

Select "Printer setting cannot be found in the list" and then tap Next.

Follow the instructions on the screen.

Wait for a while for the installation to find the printer to get the Canon MG 3600 configuration.

Click Next after installation.

Then click "Exit".

After you finish setting up your Canon printer, you can start printing. However, if you encounter difficulties configuring your printer, contact Canon's advanced printer configuration experts. Top experts are available around the clock to satisfy all your doubts and questions. Call them anywhere in the world to resolve printer issues.

  • Love
  • Save
    Add a blog to Bloglovin’
    Enter the full blog address (e.g.
    We're working on your request. This will take just a minute...