Special socket conversion box

Wherein the cover plate having a thickness between the front surface region and the back surface region at the plurality of plug blade apertures of not more than 0.055 inches. You can either get a special socket conversion box to help you do this, or use a standard double socket and drill and plug the wall (as shown here). Note: Outlet DIN Rail Mount= use # 70125-DIN Bracket & # 70125 Wall Box. Frame mounts on American (4X4) two gang wall boxes. Please note: We would recommend sitting the metal back boxes slightly further back in the wall for flat plate double wall outlet sockets and switches. NOTE: ACCEPTS # 72100X45, 72100X45-BLK, 73310X45, 74600X45, 74700X45, 77508X45, 77509X45, 84100X45 OUTLETS ONLY. This invention comprises a base plate and a decorative face plate that slides between a closed position where the sockets are occluded, and an open position where the sockets are exposed. ACCEPTS COMBINATIONS OF 22.5mmx45mm, 45mmx45mm DEVICES OR ONE 67.5mmx45mm WITH ONE 22.5mmx45mm MODULAR DEVICE. This small thickness allows the plug blades to be inserted deeper into the plug blade apertures of the receptacle despite the insulative plug cover layer extending over the socket face. In addition to outlets having different numbers of apertures, outlets may have varying numbers of socket faces. To maximize the contact made by the plug prongs into the socket, it has been found that a thickness within the range of 0.035-0.045 inches provides a substantially maximum contact between the plug prongs and the socket for a covered socket face while providing adequate strength of the covering surface.

The back box finish will matched to the finish you choose for the sockets and switches. ACCEPTS ONE 22.5mmx45mm SIZE MODULAR DEVICE. Scame surface mount sockets that are available in a choice of current ratings, pin types, voltages and IP ratings. Under certain circumstance you may not be able to, or want to, put back boxes in the wall. A cover plate having apertures to allow the sockets to protrude is installed over these components, typically with one or two screws. EUROPEAN, UK, BRITISH, AUSTRALIA, ASIA, THAILAND, NEMA 13A-250V, 15A-127V, MULTI-CONFIGURATION OUTLET, 45mmX45mm MODULAR SIZE, SHUTTERED CONTACTS. Option= Use Insulated Surface Mount Wall Box # 680602X45 for above Outlets, GFCI Sockets, Circuit Breakers. MOUNTING FRAME FOR AMERICAN 2X4 WALL BOXES. Similarly, these covers do not provide a means for making the outlets more attractive. Gira water-protected surface-mounted socket outlets. These are often available in the same finish as the sockets and switches, so they match the front plate, but be aware these are not universal sizes, so some plates, especially larger plates, may not sit well on the front of them. To the op surface mounted pattress's are what you have easy enough job for a sparky to take off and fit flush back boxes probably a couple of days work to do them all depending how many there are, or if you feel confident enough to do it yourself. More complex devices have been invented to achieve an aesthetically pleasing electrical outlet.

You might find that on occasions it is just not possible or desirable to chop into a wall to fit a flush mounting wall box. Note: Metal Wall Box, Surface Mount= Use Box # 79420-D or # 79425-D, Requires Frame # 79120X45, Wall Plate # 79140X45. The range includes 8 sizes of faceplate options, a selection of 20AX modules and outlets. EUROPEAN, INTERNATIONAL 20A-250V THREE WAY SWITCH (EUROPEAN 2-WAY), 22.5mmX45mm MODULAR SIZE. Additionally, a plane defined in part by one or more regions of the front surface with thickness 88, whereby the plane extends parallel to the cover plate, may serve as a boundary through which no portion of the front surface of the cover plate may extend beyond. Decorative cover plates known in the art attempt to make outlets more attractive by attaching a new cover plate to existing cover plates. We currently offer 2 different types of Wall Mounted Surface boxes and we can supply these in almost any finish to match the Sockets and Switches on our website (with one or two exceptions). MODULAR DEVICE BLANK INSERT, 22.5mmx45mm SIZE. Break away the piece of plastic covering the cable entry hole you're planning to use (the one in the back if the cable's buried in the wall, one in the side if it's surface-run). Shows cover plate 20 having a flat face with a set of apertures 22 for plug blades and a securing aperture 24. This HPM 10A plug base is surface mounting. Do note, while we always aim to give you accurate product info at the point of publication, unfortunately price and terms of products and deals can always be changed by the provider afterwards, so double check first.

Surface mounted sockets are really only a cosmetic issue but old wiring may need to be replaced. Electrical socket outlets now available online. The cover plates of the present invention typically have outside dimensions that substantially match a conventional or existing cover plate, but the cover plates herein described may be designed in any desired size and shape to enhance the appearance of the electrical outlet. Option= Use Insulated Surface Mount Wall Box # 680603X45 for above Outlets, GFCI Sockets, Circuit Breakers. Shows cover plate 30 having a decora face 32 with a set of apertures 22 for plug blades and a securing aperture 24. Mount outlets low on walls where they'll be hidden by furniture. ACCEPTS COMBINATIONS OF 22.5mmx45mm, 45mmx45mm DEVICES OR ONE 67.5mmx45mm MODULAR DEVICE. If you're flush mounting a box in a solid wall, you'll need to cut a neat recess through the plaster and into the masonry behind. Wall Power Sockets Charger allows you to plug into any AC outlet, saving space on floors and countertops. ACCEPTS ONE 45mmx45mm OR TWO 22.5mmx45mm SIZE MODULAR DEVICES. Here you'll find back boxes that will help you create those much-needed sockets as well as pattress boxes that are designed for single sockets, switches or other electrical fixtures. In particular embodiments of the present invention, the thickness 88 may be accomplished by recessing or reducing the thickness from the back surface of the cover plate. If you need exceptionally robust materials and complete reliability, the Gira water-protected surface-mounted socket outlets with IP44 or IP66 protection are the perfect choice - for outdoor areas as well as cellars, garages and workshops. Accordingly what is needed is a cover plate to cover the socket face of unattractive electrical receptacles and thereby make the receptacle less noticeable while maintaining proper functionality of electrical devices plugged into the covered socket. WALL PLATE, ONE GANG SIZE. Consequently, the receptacle and sockets are left exposed and the face of the sockets become covered with paint splatters and the like. You can choose two basic ways of mounting your new socket: surface-mounted or flush-mounted. Shows cover plate 40 having a face with a duplex shape 42 with a set of apertures 22 for plug blades and a securing aperture 24. ACCEPTS 22.5mmX45mm, 45mmX45mm MODULAR SIZE DEVICES. In particular embodiments, the cover plate also comprises an alignment structure to align the plurality of plug blade apertures on the cover plate with the plug blade apertures on the socket face. All the sleeves and pins of the IEC 309 HP socket-outlets and plugs are surface-treated with nickel-plating to ensure full protection against corrosion, oxidation and abrasion. Note: Requires # 79210x45-N wall box mounting frame. Typically, the number and position of apertures on the cover plate will match the number and position of apertures on the receptacles, although fewer apertures may be used on the cover plate to exclude particular apertures in the socket faces, if desired.

When we rewired our house upstairs we had surface mounted sockets in the bedrooms. It sounds like you have what are called 'surface mounted sockets'. ACCEPTS 67.5mmX45mm, 45mmX45mm, 22.5mmX45mm MODULAR SIZE DEVICES. Note: Metal Wall Box, Surface Mount= Use Box # 79420-D or # 79425-D, Requires Frame # 79120X45, Wall Plate # 79130X45. Note: Mates with Nema 5-15R (15A-125V) & Nema 5-20R (20A-125V) outlets. For example, if a plug inserted into an outlet with a conventional cover plate is yanked out of the wall sideways, that is, substantially parallel to the wall, the forces applied to the sockets can cause the receptacle to be jarred loose or to crack. Start by mounting a box base at an existing outlet. In the a particular embodiment, the cover plate is rectangularly shaped to cover a duplex receptacle, having apertures to receive plug blades, a center hole for receiving a screw which secures the cover plate over the duplex receptacle and a thickness at the apertures for receiving plug blades of not more than 0.075 inches. NOTE: ACCEPTS 22.5mmX45mm, 45mmX45mm MODULAR SIZE DEVICES. Note: Insulated Wall Boxes, Surface Mount # 680602X45 Series. And because socket outlets in the garden or on the patio or balcony are often installed in prominent locations, Gira socket outlets come in a wide range of attractive designs. Surface Mounted boxes are also known as a Pattress. The front plate of a socket or a switch is then attached to the back box. Shows cover plate 70 having a face with duplex shaped grooves 72 with a set of apertures 22 for plug blades and top and bottom securing apertures 52 and 54. It will be understood by those of ordinary skill in the art that a duplex face or duplex socket face are those typically used wherein there are two sets of plug blade apertures located on two truncated circle shaped insulative socket faces.

With surface wiring you can add outlets, switches and lights wherever you want easily and quickly, without tearing open a wall. Note: Insulated Wall Boxes, Surface Mount # 680601X45 Series. Most other companies only offer surface mounted boxes made of plastic. All of our surface boxes are 28mm deep and this allows you fit almost any faceplate in our range onto the front of these boxes. However, the underlying receptacles and cover plates are made in standard colors, usually beige and dark brown, and unfortunately do not match many decorative cover plates. Note: Not for use with # 685041X45, 685042X45 Outlets, # 74452X45 Circuit Breaker. Frame mounts on American 2X4 wall boxes. ACCEPTS ONE 45mmx45mm OR TWO 22.5mmx45mm MODULAR SIZE DEVICES. Note that there are restrictions on some products, and some products cannot be shipped to international destinations as well as Highlands or Northern Ireland. Because these decorative cover plates overlay the existing cover plate, these inventions result in a cover that projects farther from the wall than the original cover plate, thereby making the outlet even more noticeable. Note: Not for use with # 70100X45-IT, 74600X45, 685041X45, 685042X45 outlets, 79512X45 switch. Because most cover plates allow the face of the sockets to be exposed, such mismatched sockets and cover plates cause the outlets to be more conspicuous. Although cables may be joined inside back boxes, due simply to their presence at convenient points in the wiring, their main purpose is to accommodate switches and sockets. While improving safety, these devices are multi-component parts that are relatively expensive, more difficult to install than a conventional cover plate, and prone to breaking. Shows cover plate 50 having a flat face with a set of apertures 22 for plug blades and top and bottom securing apertures 52 and 54. Note: Mounts on American 2x4 size wall boxes. EUROPEAN, INTERNATIONAL 20A-250V THREE WAY SWITCH (EUROPEAN 2-WAY), DOUBLE POLE ACTION, 45mmX45mm MODULAR SIZE. No. 5,285,014 that also covers all exposed surfaces of an electrical outlet. Surface-mounted one and two-piece grounded sockets for dry spaces (IP20). A cover plate of the present invention can help protect the receptacle because as the plug is pulled sideways from an outlet having the present cover plate, the applied forces in part act on the cover plate, reducing or eliminating the forces on the receptacle. We often find that in many listed buildings you are simply not permitted to ruin the fabric of the wall surfaces and it is at times like these that our Surface Mount Wall Boxes offer you the perfect solution. The cut-out for these metal back boxes are normally chiselled out of the wall material.

It is desirable, then, to provide a cover plate that can be installed over existing receptacles that covers not only the wall box assembly, but the face of the sockets, too, in order to make the outlet less conspicuous and more attractive. The metal back boxes are used in solid walls, such as stone, brick and breeze block walls. As most of the pattress boxes we sell are finished with a decorative finish (often in metal) the cable entry point on these surface mounted back boxes are in the back of the box, not on the sides, as is often the case with standard back boxes. An easily-installed cover plate for hiding the face of sockets by covering an electrical outlet, including the face of the sockets. NOTE: MOUNTS ON AMERICAN 2X4 FLUSH "RECESSED TYPE" HORIZONTALLY INSTALLED WALL BOXES. By submitting your email, you are giving your consent to receive email updates on products, special offers and exclusive discounts from If you wish to stop receiving these you can unsubscribe at any time. Note: Not for use with # 70100X45-IT, 685041X45, 685042X45 Outlets. Conventional electrical outlets are made of several components, including a wall box and a receptacle, which is typically composed of pairs of sockets and a yoke. Note: Mounts on American 2x4 size wall boxes, requires on # 79120X45-N mounting frame. Crabtree has a stylish, elegant range of plug sockets that will complete any home and office in style and functionality. Socket outlets from the Gira TX_44 range feature a robust cover frame and a modern, streamlined design, combining top-class functionality with a premium aesthetic. For example, a protrusion may extend from the back surface of the cover plate at the plug blade apertures corresponding to particular recesses on the socket face. Note: Metal Wall Box, Flush Mount= Use Box # 72350X47D, Requires Frame # 79120X45, Wall Plate # 79140X45. Gira TX_44 socket outlets. Provides a connection to the main power supply rated at higher voltages and currents than household plugs and sockets. Option= Use Insulated Surface Mount Wall Box # 680604X45 for above Outlets, GFCI Sockets, Circuit Breakers. Note: Mounts on American 2x4 wall boxes, requires one # 79170x45-N mounting frame. For example, conventional outlets have two socket faces and are known as single-gang outlets. MODULAR DEVICE BLANK INSERT, 45mmx45mm SIZE.

  • Love
  • Save
    Add a blog to Bloglovin’
    Enter the full blog address (e.g.
    We're working on your request. This will take just a minute...