Fall For DIY

fallfordiy.com · May 26, 2015

DIY Solid Gold Letters

I know, I know. I've lured you here on false pretences. I hold my hands up - I have not found a way to DIY solid gold letters at home. If I had I'd be in Hawaii by now. Instead I've found the next best thing. Fake solid gold letters. After a long obsession with this oh so shiny gold contact paper (since this post) I finally decided on the first project I wanted to use it for. And it got MADE!

I actually surprised myself with how easy this project was. I've had these letters waiting for a makeover for around a year. Why did it take me so long!?! I'm on a mission to complete all those projects just left by the wayside. If they all turn out as awesome as this I'll never leave a project again (... ok, perhaps not as much)

Materials

Shiny Gold, Self-Adhesive Contact Paper | Cardboard Letters | Pencil | Ruler | Craft Knife

Optional

Sticky Fixers | Cord | Bead Reamer

Roll out the contact paper shiny side down and secure in place with heavy objects at the corners. Using the pencil draw around the cardboard letter onto the back of the contact paper. (I'd suggest starting in the corner to get the most out of the roll)

Using the craft knife cut out the letter shape. Go slightly in from the line. Just a millimeter or two to make up for the excess that was added by the pencil.

When you've cut out the shape peel off the backing paper at one edge and line up with the shape of the letter. Lining up on a longer edge will help you find the correct position. Remove the rest of the paper and run a squeegee over the surface to remove any air bubbles.

Repeat these steps for the other side of the letter.

Measure the depth of the letter and cut strips of contact paper at this thickness. Starting at a corner press the sticky side of the paper down and run around the whole letter pressing firmly and removing air bubbles as you go. It the strip starts to go off course you can peel it back and set it right a couple of times without it losing its stickiness.

Use a thin ruler to press the paper into corners and difficult to reach spots. One the letter is entirely covered trim off any excess with the knife. All that's left to decide is how to display your letter.

Use sticky fixers to create fixed book ends or attach to your walls. You can create a shiny, shiny banner by using the bead reamer to poke holes in the sides of the letters and string them up. Or just dot them around to create reflective vignettes all around your home.

I'm thinking about putting these on the wall above my bed. Then it's always made... no? Not how that works? Damn.

The post DIY Solid Gold Letters appeared first on Fall For DIY.

View original
  • Love
  • Save
    5 loves 17 saves
    Forgot Password?
    Add a blog to Bloglovin’
    Enter the full blog address (e.g. https://www.fashionsquad.com)
    We're working on your request. This will take just a minute...