Easter Treat Boxes - Welcome Easter
When I was at OnStage last November, I saw this pattern for a treat box.
So I came home and designed some with an Easter theme.
Since there are no dies for these cute characters, I did fussy cut them out. It was pretty easy to do.
In case you can't read the last line below, it says score lengthwise at 1 3/4". And the 1 3/4" side will be the top. So it is 2" around on each side and 1 3/4" high. If it were 2" high, it wouldn't fit into the outside covering very well.
There is also Tear & Tape on the back of the little flap on the left of the picture below.
When you fold up the box, overlap the two bottom pieces first that are without the Tear & Tape. Then pull in each end piece.
For the outside wrap around the box, begin with a 11"x 2" piece of card stock.
Score it at 1 1/2" 2 1/2", 4 1/2", 6 1/2", 8 1/2", 9 1/2".
The punch each end with the Scalloped Tag Punch.
Pull the ends together and fasten the top punched tabs together with Tear & Tape.
I have listed below the products that were used on these cards.
Please add the March Host Code to your order which is JRJM2BJS
If you order is $150 or more, then you do not use the host code and you
get the benefit of the hostess credit! That's fun!!!
Thank you for stopping by.
Please e-mail me if you have any questions or feedback