Free DIY Furniture Plans: How to Build a Jasper Serving and Bar Cart

Showcase: Built From These PlansI am so honored each and every time one of you fine friends builds from these very plans! If you have built this piece, please take a moment and showcase your build! We are dying to see your fabulous hard work!

I have been wanting a bar cart for a long time, haven't you? If I can't have my vintage dream, which it seems I can't, a handbuilt beauty is perhaps an even better option since I get the satisfaction of making it! The cart can be painted with metallic paint to mimic metal if you wish, and it would be so dreamy in brass, don't you think? Xx... Rayan

Sponsored // Psst... You can check out your #KleenexStyle by clicking here and discover the perfect design to suit your decor. No more hiding those boxes during this up coming sinus season... can I get a yahoo for that?

$25-$50

• Tape Measure
• Saw – Jig, Circular, or Miter
• Drill
• Square
• Sander
• Kreg Jig
• Brad Nailer

• 8 – ¾” square dowels at 3’ (or pieces ripped from a 1x board)
• 4 – 2x2 at 8’ (or 2 – 2x4 ripped in half)
• 1 half sheet of ¾” plywood

• 1-1/4” pocket hole screws
• 2-1/2” pocket hole screws
• 1-1/4” brad nails
• 2” casters
• Wood filler
• Sandpaper
• Wood glue
• Finishing Supplies

• 2 – 2x2 at 27-1/2” – Legs
• 2 – 2x2 at 30-1/2” – Legs
• 1 – 2x2 at 23” - Handle
• 4 – 2x2 at 20” – Leg Frames
• 2 – 2x2 at 34-1/2” - Stretchers
• 2 – ¾” plywood at 20” x 34-1/2” – Shelves
• 2 – ¾” square dowels at 20” - Rails
• 2 – ¾” square dowels at 34-1/2” - Rails
• 28 – ¾” square dowels at 5” - Spindles

Cut the pieces for the legs and frames. Set the Kreg jig for 1-1/2” material and drill pocket holes in each end of the frame pieces, as well the top edge of the longer legs. Do not drill pocket holes in the handle piece. Attach the frame pieces to the legs as shown using glue and 2-1/2” pocket hole screws. Attach the handle to the longer legs using glue and 2-1/2” pocket hole screws.

Cut the pieces for the stretchers and drill pocket holes in each end. Secure to the end frames using glue and 2-1/2” pocket hole screws.

Before beginning to build, always check in on my site to make sure you have the most up to date set of plans, I occasionally update and change the plans to make the building process easier or to allow for less expensive purchasing of materials! Read through the entire set of instructions and all comments before beginning this project. If you print out or save plans, be sure to check in on my site to be sure you have the most up to date set of plans, as I occasionally update things for ease of building or buying. If you are new to building, read through the GETTING STARTED section and other articles found under the BUILD tab in the menu on my site, it has valuable information about how to get started, tools and techniques. If you are unfamiliar with the finishing process, visit my Finishing school for some tips and tricks for painting like a pro and for special finishing practices. Use glue to secure your joints and Consider Painting or Staining individual sections prior to assembling. This makes the paint application virtually flawless. Coat with a spray on Poly or Wipe on Poly to protect your finish and your piece and it will last for ages. Adhere to all safety standards and guidelines, and be sure you follow safety protocol throughout your build. If you are unsure about whether you are building safely, run a quick online search for the tool or technique you are using, or contact me via email or post to the forum before you move ahead. My contact info can be found in the menu of my site.

Cut the pieces for the shelves. Set the Kreg jig for ¾” material and drill pocket holes in all four edges of each piece. Secure to the stretchers and frame pieces as shown using glue and 1-1/4” pocket hole screws. The top face of the shelves will be flush with the top face of the stretchers and frame pieces.

Attach the casters to the bottom of the legs according to the manufacturer’s instructions. For an easy tutorial on installing casters, click here.

Cut the pieces for the rails. Drill one pocket hole in each end of the longer pieces. Mark the position for the spindles on the longer pieces, then secure the spindles using glue and 1-1/4” brad nails. Mark the position for the spindles on the stretchers and frame pieces. Secure the rail assemblies to the legs using glue and 1-1/4” pocket hole screws. Align the spindles with the marks on the stretchers and frame pieces, then secure them using toenailed 1-1/4” brad nails.

Fill any Screw, Nail or Pocket Holes, Sand and Finish as Desired. For Finishing Tips and Tricks visit my Finishing School

//Disclaimer: Some rights reserved. Private use only. Feel Free to link to any of my plans so long as you ONLY use 1 image and provide an ADEQUATE link back to the original source and appropriate plan! Plans from this page are not to be used for commercial purposes or republished without the express written consent of Rayan Turner, The Design Confidential I hope to provide accurate plans, however, I cannot guarantee each plan for accuracy. Not every plan that I post has been built and tested, so you are building at your own risk. It is recommended that you have a clear understanding of how the project works before beginning any project. Please contact me if you find an error or inaccuracy so that I might fix it. //Post contains affiliate links