OAL: Attaching the Skirt

Good morning, OALgers! Today we are going to attach the skirts to our bodices – which means we’ll have semi-dress-looking things by the end of this post! Yay!

While this post is shorter, picture-wise, than the previous posts for this OAL (and thank God for that! The rest of the sewing from here on out is much easier), there are a few things I want to cover here:
- Moving the pockets from the front princess seam, to the side seam
- Converting the gathers to pleats
- A different way to sew gathers

Ready? Let’s start with moving those stupid pockets. Ideally, you’d do this before you cut your fabric out, but it’s really no biggie if you’re doing this right before you sew the pockets in (as I tend to do). Just make sure your marking tool doesn’t bleed through the pattern tissue, or consider removing your fabric from the pattern pieces just to be extra sure.

If you don’t want to move the pockets, that’s perfectly fine – you can skip this step. Just be warned that they are right down the front of the dress – in what I thought was a pretty awkward spot. I don’t know who had the brilliant idea to put the pockets there on this pattern, but as far as I’m concerned, pockets belong in side seams (or over a butt, which is another nice place to put a pocket I suppose), so that’s where I am moving mine to.

Start by locating your skirt pieces – the skirt front and skirt side front will have dots marked where the pockets should go. You’ll also want the skirt back piece, as we are going to move some markings over there. I X’d out the old pocket markings (the ones printed on the pattern), so I wouldn’t get confused as to which markings to use.

Starting with the skirt side front, measure from the top how far down the pocket marking is – about 3.5″ in this case.

Now move to the opposite side of the pattern piece (where there aren’t any pocket markings) and make a dot the same distance from the top.

Measure the distance between the two dots and mark the second dot as shown on the side seam.

Repeat for the skirt back, marking on the seam that is NOT indicated to be the center back. It’s also a good idea at this point to lay your pieces together so you can be sure the markings match up and your pockets are nice and even.

Ok, onto adding the pockets! These next steps are the same regardless of what seam your pockets are being inserted into…

If you’re using a machine to finish your edges, go ahead and do that now. Finish all the raw edges of each of side of each skirt piece, as well as all edges of each of the 4 pocket pieces. If you’re pinking, you can finish as you go.

Match the markings on the pocket to the markings on each of the 4 skirt pieces with right sides together, and pin. Sew the pocket in place (from top to bottom), using a 3/8″ seam allowance. The smaller seam allowance will help that pocket stay hidden to the inside of the skirt.

You should have 4 skirt pieces with a pocket sewn on each one. Take the pieces to the ironing board and press all the seam allowances toward the pocket. If you want to understitch the pockets (I always do), you may do so now.

Now match up one skirt back piece with one skirt side front piece (or skirt front with skirt side front), right sides together, and pin the skirt seam above and below the pocket, as well as around the pocket itself. Excuse the cat tail :P

Using a 5/8″ seam allowance, sew the skirt and pockets in one long swoop of stitching. Start at the top and sew until you get to the pocket markings.

Lower your needle, raise the presser foot, and pivot the fabric until you can continue to sew around the pocket. When you get to the second set of pocket markings, lower the needle and pivot again, then continue down the side seam of the skirt.

You should have two skirt pieces that look like this.

To press the pockets, start by clipping the seam allowance connecting the pocket to the skirt, as shown. Be careful not to snip your stitching lines!

Now press the pocket toward the skirt side front (or skirt front), and press open the seam allowances that are above and below the pocket.

Sew the last skirt pieces (depending on where you pockets are, you will either be attaching the front or the skirt backs) and press all the seam allowances open. Your skirt should look like this.

For converting the gathers to soft pleats:

Pin the skirt to the bodice at all seams and notches (so bodice side seam to skirt side seam, etc).

You should have a good amount of excess between each pinned section.

Working in one section at a time, pinch the excess and manipulate it into small pleats, then pin into place. I like to start with one section and then immediately do the same section on the opposite side (so, center front right then center front left, etc), so I can be sure that my sections are mirrored with the same numbers of pleats that are facing in the same direction. For my dress, I had 1 pleat in the front section, 2 in the section between the side seam and the princess seam at the front, and 3 at the back skirt piece, with all pleats pointing to the center front.

Once you’ve pinned your pleats to your liking, baste the entire edge into place and double check from the outside that the pleats are even, mirrored, and facing in the same direction. Then stitch, finish the seam allowance, and press the seam toward the bodice.

And done!

For gathering the skirt, read on!

Now, there are a few ways you can gather your skirt. You can do the standard long basting stitches that you pull to gather (using 1, 2, or 3 rows, depending on your preference) – which works perfectly fine, but I always find that my threads snap and that just drives me crazy. I’m going to show you another way to gather, which I find easier, more efficient, and works REALLY well if you’re dealing with a bulky or heavy fabric.

You need a long string to gather with. I actually like to use thin crochet thread, but silk thread, button hole twist, really thin yarn – hell, even unflavored dental floss – will all work just as well. For this skirt, I’m using button hole twist because I’ve somehow managed to lose my crochet thread. Oh well. Anyway, cut a length that is a few inches longer than the width of your ungathered skirt.

This next part probably won’t make a lot of sense, but just bear with me! Lay your thread on the right side of your fabric, a little less than your seam allowance (so for this skirt, 1/2″ from the edge). Set your sewing machine to do a wide zig-zag stitch and carefully sew over the thread, making sure the needle doesn’t actually puncture the thread – it should just zig zag across either side of the thread.

It’ll look like this when you’re done.

Now, pin your skirt to your bodice, again matching up all seams and notches.

There will be quite a bit of excess between each pinned section. To gather, just pull the thread you zig zagged over and distribute the gathers as you like. Twist the excess thread around a pin at each end of the skirt, to keep it in place so you can manipulate the gathers.
(I don’t know why this photo won’t show. You can see it if you click on it and go straight to Flickr. It’s just a picture of how to twist the thread around your pins.)

This is a MUCH easier way to gather than the standard basting stitch, as you’re much less likely to break your thread (and thus have to start over again). The best way I’ve found to do this is to pull the threads until the skirt is the same width as the bodice, twist the ends around a pin so the gathers stay in place, and then slide the skirt fabric around and redistribute the gathers until they are even across every section. Leave yourself at least 5/8″ wide ungathered sections of the skirt at the center back – it’ll make it easier to insert your zipper.

Once you’ve got the skirt the way you like it, sew into place at your 5/8″ seam allowance (you can baste first to check the outside, if you like). I sew mine with the gathers facing up, so I can keep an eye on them and make sure they’re not doing anything crazy while they’re being sewn.

Once sewn, just give the gathering thread a nice pull and it should slip right out of the zig zag stitches – which means you can totally use it again :) Now finish the seam allowance and press it toward the bodice, being careful not to flatten the gathers.

And done! Yay!

Two more things-
- A few of y’all were asking if we were planning on opening a Flickr Group for you to share your OAL photos. While Andi & I weren’t intending on doing so – the Official Hangout Thread is on Ravelry – we realized that some of y’all might only be doing the sewing portion and/or don’t have a Ravelry account. SO. We’ve created the Official Unofficial OAL Flickr Page, which you can join and post to (photos or discussions) if you feel so inclined! Please keep in mind that this page is strictly for sharing/discussion purposes – i.e., anything solely posted here will not be included in the prize drawing (if you want prizes, you gotta post your finished outfit on the FO thread on Ravelry), but share away! We absolutely don’t want to leave anyone out :)
- Also, don’t forget to enter to win the Fashionary Sketchbook giveaway, if you haven’t already done so. Giveaway ends on Wednesday!

As always, let me know if you have any questions! :)