diy Design Fanatic

Stealing Floor Space To Build A Closet


Isn't it wonderful when you get a multi project space finished after it taking many, many, months of work?
Even though we still have a couple of projects left to do in this space, we are considering the upstairs bedroom at the mountain cottage finished, now that the closet and closet doors are installed and painted!
Yay!


Here's the original plan we had for the upstairs bedroom, bathroom and closet:

This is the space before we even took the wallpaper down. The flat panel door is the entry door to the bedroom. The space to the left was unusable and the perfect place to put a closet.


This is the closet in the rough framed stage. After framing, he drywalled the framing and trimmed it out.


Mr. DIY started off making the closet doors with a full sheet of plywood which he cut to fit the closet opening plus about 21/2" of overlap because they would be sliding doors and one goes in front of the other.

He used his mini-circular saw for the job. (no, we weren't given any compensation or a free tool for this)


3/4" wood screen bead molding (similar to scribe, but rounded on both edges) was used to cover the rough ends of the plywood. He used wood glue and brads to attach the scribe to the plywood.

For the front of the doors, he split 1 x 3's in half, depth wise.


These were placed on the front side of the doors, to create a Craftsman style framed look. He attached them with wood glue.

After filling all the holes and gaps, the doors were primed. (my job)

Mr. DIY installed a Stanley bi-pass door track, which came in a kit. We didn't just want to paint the metal, so Mr. DIY cut down a piece of molding and glued it over the metal track.( see next photo)



All finished!



This closet has 52" of short hanging space, plus a big wood shelf. The closet rod is metal and the shelf sits on wood cleats. There is a 3" deep support in the middle, which is held in by friction. Eventually, we will install a light in the closet that comes on when you open the door.


Everything was painted with Benjamin Moore Decorator White. The trim is in semi-gloss and the walls are eggshell. The top surface of the shelf was sealed with Minwax water based PolyAcrylic so that nothing would stick to the paint.


Here's the space we "stole" BEFORE:


And here's the space AFTER: There's still plenty of space to the left of the closet for a 66" wide dresser and a chair.


Here's the view which shows the storage shelves and the closet on either side of the door. Shoes and folded items can be stored on the shelves. If we were to live here someday, we might want to put doors on the shelves. We consider the space as you enter the room the closet. (remember, we took out the original closet and put in the Worlds Smallest Half Bath).


If you missed the post of how we built the custom storage shelves, you can find it HERE.


52" isn't much hanging space for clothes, but we plan to build more 3 feet more closet space when we enclose the space just outside the upstairs bedroom. That will give us more closet space than we had upstairs when we bought the mountain cottage.
Now that the bedroom is finished and is habitable, we've turned our attention to the kitchen. Of course there's a project we have to do before we start ripping out those lovely cabinets. We should be finished with our vintage style pantry in another weekend or two. Then, the kitchen reno is is on. Can't wait. Hope you come back to see the updates.
Pam





Due to stolen content, I can no longer provide a full RSS feed. Thanks so much for understanding.
  • Love
  • Save
    1 love
    Add a blog to Bloglovin’
    Enter the full blog address (e.g. https://www.fashionsquad.com)
    We're working on your request. This will take just a minute...