DIY faux pallet crate

i want to start of by saying that i love pallet furniture. i love pallet chairs, pallet tables, pallet gardens, pallet beds, you get the idea. but most of all, since i love organizing and storage, i love pallet crates. i love the rustic worn look they have, and if they have casters even better! storage with portable pallet-y goodness! unfortunately, whenever i look for pallets they always look like they're in really bad shape. and i tried taking one apart once and it was really rather unsuccessful...in fact i have the sad remains still on my lanai to remind me of what a horrible failure it was lol. i also read some articles about how some pallets are chemically treated and it can be really difficult to tell which ones those are. and since i have 2 bunnies who have to nibble on everything i decided that maybe using pallets wasn't the best option for home decor. but i still wanted some storage crates. so i went and bought some pine lumber and made this bad boy:first, apparently city mill really only sells pine and mahogany. and i wasn't gonna shell out for mahogany when i was going to make it look old anyway so i was stuck with pine. which is probably for the best because it still ended up being about $15 just for the lumber! already way more than i wanted to spend:/ i bought (1) 1"x10"x48" and (1) 1"x12"x48" here's how i had mine cut: (keep in mind that lumber is actually smaller than what it's marked so instead of 1" it's actually more like 3/4")the 1" x 10" will be the sides-first, i had them cut it into (2) 23.5" x 10" pieces. then i had them split both those pieces in half (hotdog style). so you should end up with 4 pieces that are 23.5" x 5" (technically a little less than 5"). originally i had them cut the pieces to 24" because i forgot that lumber is actually smaller than marked, so when i got home and double checked i had to take an extra 1/2" off all 4 pieces. super annoying when you're working with a leatherman tool... the 1" x 12" will be the front/back and bottom. i had them cut (2) 12" x 12" and (1) 22" x 12" pieces. you can cut holes to make handles in the front/back like i did or you can buy handles from the hardware section.i stained and sealed all the pieces first then put it together. i started by attaching the front and back to the bottom piece then added in the sides. the construction is really pretty simple. and i had to spend $12 on casters so the project was already almost $30! which again, was way more than i originally planned on spending. but i still liked the way it turned out. city mill also has this little cart in the lumber section of scrap wood for 50 cents a piece. when i was there they had a lot of chemically treated 2x4 pieces so you might be able to make a crate for much cheaper.as for the finish, i ended up using minwax driftwood stain. i like the way it turned out but i wish it had more of gray tone. i had originally planned on using the vinegar/steel wool technique that is supposed to oxidize the wood and give it a really aged appearance. well i put one piece of superfine steel wool into apple cider vinegar for one day and tested it out. when i took the wool out it looked the same but i could definitely see little pieces of it floating in the vinegar and it smelled pretty rusty. the first few pieces i tried had more of a brown finish rather than the gray i was looking for. i waited a couple days and it was slowly starting to turn a light gray color but it was still really inconsistent. then i stumbled across a post where the writer would leave the solution sitting for weeks! well i didn't really feel like waiting around for weeks with a pile of wood in my kitchen so i just bought some stain instead. i still have the solution though so maybe next month i'll make something else that i can try it out on...linking up herehave a great weekend!!P.S. if you're interested, you can find the anthro rosette pillow here and the chevron blanket here