How to make it:
-Draw line across the board at 11 5/8″ from one end (this gives an extra 3/8″ to the back side of the stand)
-Use the saw to cut along this line.
-On the top half, (the one with the extra 3/8″) measure 1.5″ down from the top and make a mark at the center of the board and then a mark at 1″ in from each side. Also mark 6 1/4″ down from the top at the center and 1″ in from each side. (These are for the dowels.)
-Drill a hole most of the way through the board at each mark.
-Cut six 12″ pieces of dowel.
-Screw the base piece of wood to the back of the stand.
-Glue dowels in place.
-Fold each piece of leather in half. Stitch across, giving enough room for dowel to fit through. About 1″
-Now fold about an inch on each end and sew along the edge.
-Slide the leather on the dowels once they are completely dry and fill it up with your favorite wine!
xo. Caitlin