Lexmark X5650 Printer Problems And Troubleshooting Guide
It is a known fact that Lexmark printer develops high-quality prints with fantastic printing speed and reliable printing options Lexmark x5650 printer is one of them. The main advantage of Lexmark x5650 printer is that it can quickly be moved from workstation to another place, an additional good part is an excellent capacity for printing and color quality. Yes, Lexmark printer strives brilliant printing condition with high pace character. However, there are times when the user faces Lexmark x5650 printer problems at the time of its functioning. That time they only need reliable technical support, and they can contact the helpline services anytime soon. But before that here are, some guidelines for the users to troubleshoot the issue before marching over to the handset.
Points to remember
Some printer issues are very simple to solve. If the printer is not responding, first make sure of the following points:
. The printer cable is attached to the printer and the host system.
. The power cord is plugged into the printer and a suitably grounded electrical outlet.
. The printer is switched on.
. The electrical outlet is not switched off by any breaker.
. The printer front, top, and rear doors are entirely closed.
. All printer options are correctly installed.
If the issue still sustains, then the user can follow these instructions.
Common issues faced in Lexmark x5650
Some of the most common problems which are faced by Lexmark printers are given below:
. Documents do not print
. Papers print slowly
. Documents misfeeds and paper jams
. Documents print poorly
Lexmark printer troubleshooting
The user has the authority to contact Lexmark customer service anytime they want. But before calling the helpline number here are some typical steps which the user can use:
1. Documents do not print
. Verify that the cartridges are nicely installed.
. Verify that the paper is loaded correctly.
. Apply an undamaged USB cable.
. Verify the all-in-one status to make sure that the document is not being held or paused.
. To check All-In-One status:
. Tap start- settings- printers.
. Double-tap the Lexmark series icon and then click the printer.
. Make sure no check mark resembles next to pause printing.
. Print a test page.
. Verify the software program.
2. Papers print slowly
. Disconnect the programs that are not in use.
. Reduce the print quality resolution
. Consider acquiring Random Access Memory (RAM) for the computer.
3. Documents misfeeds and paper jams
(1) Paper misfeeds
. Apply a paper recommended for the printers.
. Do not overpower the object and force paper into the all-in-one.
. Do not insert too many papers into the all-in-one.
. Verify that the paper guide rests peacefully against the left edge of the paper and does not produce the document to bow in the paper support.
. Put the all-in-one on a flat, level surface.
. Choose the correct paper type
(2) Paper jams
If the paper jam is seen in the paper support or the ADF, then the user should remove the paper from the all-in-one
. Tap the power button to switch the all-in-one off.
. Begin by opening the control panel and slowly pull on the paper to remove it.
. If the user cannot reach the paper because it is too far then begin the cartridge access door, and then try to pull the paper out.
. Terminate the cartridge access door, and then switch off the control panel firmly until it snaps into the right place.
. Tap power to turn the All-In-One on, and then print the document
4. Document prints poorly
When the document is too light or too dark, then the user can lighten or darken the document from the control panel.
. On the control panel, tap Lighter/Darker.
. Press the right arrow to darken the document or the left arrow to lighten it.
If the user can't fix these issues even after this simple guideline, then they can contact Lexmark customer service for more help and assistance
