majicguestpost

Humidity in the bedroom: Causes, solutions and tips

If the air in your room is stale, stains appear on the walls, or droplets are forming on the windows, you are unfortunately dealing with moisture problems in your room. Moisture can cause health problems and structural damage. This is why it must be urgently remedied. Here is an overview of wet room installers near me for the probable causes of humidity in the room and related treatments.

What causes humidity in the room?

Several phenomena can cause humidity problems in a room. Each phenomenon requires specific treatment.

1. Condensation

The condensation is the most common cause of moisture problems in the bedroom. Water vapor is formed in a home through daily activities such as cooking, washing up, and even breathing. The created steam increases the humidity level of the air.

If this water vapor in the air cannot be evacuated with proper ventilation or ventilation, it will turn into the water on contact with cold surfaces such as windows, walls, and ceilings. Moisture spots may appear on these surfaces.

2. Water infiltration

The humidity in a room can also be due to a problem coming from the outside. If your facade is damaged or porous, rainwater can easily seep into walls and affect their interior. In this case, it is a water infiltration.

3. Climbing humidity

It is also possible that the rising humidity is responsible for humidity problems in your room. This is the groundwater that goes up in the foundations and in the walls. This type of moisture is often caused by the lack of a waterproofing membrane or by prolonged showers that raise the water table.

Since bedrooms are usually upstairs, rising humidity is not the most common cause. Of course, if your room is on the ground floor, the likelihood of rising humidity is much greater.

4. Water leaks

Finally, a possible leak, for example, a water pipe, can cause moisture problems. Leaks are often small and hidden in the walls. Their effects become visible on the walls after a few months.

How to recognize the humidity in the bedroom?

A humid chamber is recognized by several signs. Moisture or mildew stains, musty odors, paint or peeling wallpaper.

In some cases, the effect may already indicate what kind of moisture problem it is. Condensation, for example, is characterized by the formation of water droplets on the windows. Climbing moisture, too, is easily recognizable: it begins at the base of the wall and rises upward.

Adverse effects of humidity in the bedroom

Sleeping in a damp room can have a negative impact on your health, not to mention the damage that moisture causes to your home. Any moisture problem must be treated urgently. Here are some examples of what might happen if you do not do it:

Health problems: a damp room is a fertile ground for mold. Molds give off spores that can cause allergies and breathing problems. You will find more information about the impact of moisture on your health in this article.

Structural Damage: Moisture stains and mold in the bedroom are not just an aesthetic problem. In the long term, moisture can also cause structural damage to your home: peeling paint, rotten woodwork, damaged masonry, and plaster.

The smell of mold: mold smells the stench, which is anything but pleasant.

Some additional tips

A balanced moisture level is essential for your sleep. A bedroom should not be too wet, but not too dry either. Ideally, the relative humidity of the air should be between 40 and 70 %. Here are some tips for maintaining a proper humidity level in your room:

• Use a dehumidifier.

• Do not let clothes dry in your room.

• Paint the walls with anti-humidity paint.

• The temperature must be at least 15 ° C, both in summer and in winter.

• Ventilate the room by opening your windows or install a ventilation system.

• Leave the door ajar during the night.

  • Love
  • Save
    Add a blog to Bloglovin’
    Enter the full blog address (e.g. https://www.fashionsquad.com)
    We're working on your request. This will take just a minute...