Easiest Method to Make Nunchucks of Your Own

Nunchucks are perhaps the most popular weapon used these days. One of the reasons behind their popularity is the movies of Bruce Lee. Bruce Lee was the person who made them famous across the globe as he used to perform tricks with the weapon and use it for self defense.

It could be seen that he had an immense level of skills that allowed him to use it brilliantly. Would you like to replicate him and do tricks to impress your mates? Though, he had his own nunchucks, do you have? No problem, if you don’t have, we will make sure you make one before you finish reading this article.

Making nunchucks is not that easy, but we have come up with a simple method that you can follow to construct a pair for you. So, here are a few steps in the construction process that you need to follow:

Step 1: Get a Couple of Wooden Dowels

The first step in the process of making nunchucks is to get a couple of dowels of wood. These two wood serve as the sticks that would be connected later on. Make sure to get the dowels that are no more than the length of your forearms. Also, they must not be too thick. Typically, the dowels should be a foot long, and both must have the similar length. If both don’t have small length, cut the bigger one to reduce its length to required size.

Step 2: Get a Rope of Half a Meter

Secondly, you need to get a rope that would serve as the material connecting the two sticks. Make sure that the rope is not longer than 2 foot. You can also get a chain, but rope would be a better option. This length is not necessary, it can be a little reduced than 2 foot.

Step 3: Drill Holes Through the Top and Sides of Both Dowels

Drill two holes through each of the dowels. One hole must be drilled at the top and the other through the side. Continue drilling at an angle that the two holes meet. This is because you need to pass the rope through these holes.

Step 4: Insert The Rope Through the Holes

Once the holes are drilled through both of the dowels, insert the rope from the top and take it out from the side and then tie the rope. Repeat the process on the other dowel. Now, make sure that the two dowels are strongly connected through the rope.

Step 5: Fill the Holes with Glue

If possible, fill the top holes with the glue s that the rope is secured in the place. Let the glue dry for some time and then start using it. Your nunchakus is ready!

Hence, follow these steps carefully and construct a stunning nunchaku. We have saved you from spending money for buying the weapon. You can build as many as you can once you have all the necessary equipment. However, be careful while using the weapon, and ensure your safety too!