Scarves to Maxi Dress DIY Tutorial

I know I spend an insane amount of time making maxi dresses, but I can't seem to help myself. This one is very simple - you're essentially sewing the sides of 3 scarves (or 3 fabric squares together) and adding straps. See below for steps!

3-Scarf Maxi Dress DIY
Difficulty: Very Easy
Time: ~1 hour
Pattern: None - use 3 squares

Materials:

• 3 square scarves OR cut 3 squares out of lightweight fabric - I'd recommend something silky
• • For maxi length - I'd recommend 34.5" squares so that the diagonal running from shoulder to hem is 48" (keep in mind to adjust if you're taller!)
  • Because I used grid fabric, I had to follow the pattern for my squares and wound up with 37.5" squares - hence the floor sweeping length
• Strap material - I used black bias tape, but you can use fabric, leather, etc. Braided straps would be SO cute

Steps:
1.) You're going to need a person or dress form for this, but position 1 scarf point at each shoulder and pin where these meet for the placement of your neckline

2.) Place 1 point of your 3rd scarf at the center back right at the base of the neck

3.) Pin under the arms where the front meets the back

4.) Play with strap placement and mark with chalk (I didn't actually go with the one shown below, but it was fun to experiment)

5.) Sew down the center front from your pinned neckline all the way down the edge.

6.) Sew down each side from the underarm pin all the way down the edge.

7.) Pin your strap placements and carefully try on your dress. Make sure straps fit comfortably and make length adjustments as needed. Sew straps in place.

And you're finished!

Questions? Please feel free to leave me a comment below or send me an email! :)

Finished Scarf Maxi Dress