Cuff on pants
Thank you for all your nice comments and congratulations on my 10 years of blogging. It’s so nice to know that you appreciate my posts and even are inspired to try something by it.
Today I’ll do a post of the kind I like very much, a tutorial (or my way of doing things). This is about a cuff on pants. It’s been a while since I made a tutorial and I can’t even remember the last time I made cuffs on a pair of pants.
The pattern I’m using is the StyleArc Christia pant. Their description is: A trendy crop pant with all the new style features you have been waiting for. Wide waist band, side pockets, pleats and cuffs that sit just above the ankle gives this casual pant loads of style!
To be very hones I’m in doubt of this style on me, but nothing ventured, nothing gained. I made a pair of trousers last year which were very narrow at ankle height and I confess to not wearing them. These are a little wider and I just wanted to try them.
Instructions are sparse and there’s even a pattern piece that’s never mentioned in the instructions. More on that when I’ve completely finished it. So this is my take on doing it, not StyleArcs’ instructions.
For the cuffs I marked the fold lines completely and basted them. On the pattern there’s only a mark at the edge but it’s so much easier to work with the whole line marked on both sides of the fabric. Belief me, it’s worth the extra 10 minutes of doing this.
Then I clipped on the fold lines to the stitch line of the seams (of course not through the stitching). The seam is folded on top of each other and if your fabric is a bit substantial, this will cause a lot of bulk. By clipping and alternating folding to each side of the seam this is more evenly distributed.
The cuff is folded (right sides together) on the top line (furthest from the hem), pressed and then stitched. This stitchline won’t be visible and helps in keeping shape.
Tip: fold your cuff first without pressing so that you know how it’s supposed to go together.
The next step is folding over the lowest foldline to the inside and press! Then fold the middle foldline (which is the top of the cuff) over. This is how the inside looks.
My “trick” to keep the cuff in shape and easer to press after laundering is stitch again behind the cuff. The cuff is folded down and then I stitch through all layers. The last step is a stitch in the ditch in the seams to tack it.
The pants are not finished yet. I’ve made a waistband from muslin. The waistband is wide, 7.5 cm (3 inch). The pattern provides a rectangle pattern piece. This is not working on me when the waistband is a normal height, let alone on a waistband twice as high.
Making the waistband from muslin first gives me the opportunity to pin it to my shape. In this picture you can see there’s quite a bit of shaping involved.
Also I cut the back waist with a very generous seam allowance as I know that’s where I often need to change. I needed an extra 1.5-2 cm. My next step is to make a pattern piece of the waistband.
It’s King’s day today in The Netherlands, which means it’s a national holiday and lots of flags with an orange banner in the streets. Orange being the name and colour of our royal family.
