DIY Vintage Sign {A Tutorial} (Simplicity In The South)

Please bear with me as I find my blogging groove. My original plan when I began Simplicity In The South was to have two posts a week. I have found that {for now} one a week is more manageable so that I can keep my family happy, find time to do projects/tutorials, work a full-time job, and keep my sanity at the same time. I absolutely LOVE doing this blog gig on the side and want to express my appreciation to all of those that are following along! Believe me, behind the scenes, there is a whole lotta' work going on to keep this show on the road! My mantra has been this...

Source

In a prior post, I had shown you a collection of my favorite vintage sign tutorials.

The tutorial that I am sharing today uses some of the tips that I learned from that collection along with a little experimentation with some new tips that I found since that post.
To keep costs down, and to eliminate the mountain of scrap wood that has found a home on our family room floor {a.k.a. The Workshop}, I used two left over wooden v-groove planks from our teenage son's office-in-a-closet planked walls.
These planks come in 8 foot lengths and each one is 3.5 inches wide. I cut two of the planks in half, so the total size of the sign is 48" x 14". This sign could also be easily done on a piece of plywood instead.
Once I had the planks together, I flipped the sign over and added strips of lattice wood to the back to keep it together.

The sign was painted with one coat of Annie Sloan's Chalk Paint in Provence blue and then given a coat of white latex two hours later.
To age the finish, I found a great tip from Funky Junk Interiors. She uses masking tape to pull some of the paint off to give the finish a chippy appearance. This needs to be done before the paint has a chance to cure. I waited about an hour after I painted the latex on to use the tape. Since I didn't have any masking tape, I used Duct Tape, the 8th Wonder of the World.

This allows the Provence blue paint to show through. I followed that with some light sanding.

I had our oldest son make a Photoshop image of the lettering that was inspired by this photograph.

Charleston, SC
The fonts I used are Retro Lined, Brush Script and Franchise. If you would like a copy of the sign image in Photoshop (PSD) format that can be printed out to 48" x 15", just drop me an email and I will email it to you. The office supply store charged $3.50 to print the image out as an engineer's print.

To transfer the image to the wood, rub a piece of colored chalk on sheet of paper. Lay this face down on the sign and place the image that you want to trace on top. After you trace the lettering with a ball point pen, the chalk lines can be drawn with a Sharpie marker.

I did not outline my shadow with the marker since it would be painted blue instead of black. If you use the Retro Lined Font, the shadowing is done for you.
Once you have the lettering outlined, fill in with black craft paint. After the black paint dries, fill in your shadowing effect with a contrasting color. I used the same Annie Sloan Chalk Paint in Provence.

Allow your paint to dry for about 24 hours, then lightly sand to distress the lettering. Follow with a light whitewash.
For the whitewash, I diluted one tablespoon of white latex paint to 1/8 cup of water. I brushed it on and then wiped it off with a dry rag.

I have to admit. I love my sign almost as much as the city, itself. Fine southern shopping and hospitality at its' best. We will be spending our next summer vacation near there so I'd love to know which antique stores I need to scope out!